Endress+Hauser iTEMP TMT71, Руководство по эксплуатации

Страница: 80 / 96

Operating menu and parameter description iTEMP TMT71
80 Hauser
Factory setting Depends on the product root and serial number
EH_TMT71_serial number (TMT71)
Mains filter
Navigation System → Device management → Mains filter
Description Use this function to select the mains filter for A/D conversion.
Selection • 50 Hz
• 60 Hz
Factory setting 50 Hz
Locking status
Navigation System → Device management → Locking status
Description Displays the device locking status. When write protection is activated, write access to the
parameters is disabled.
User interface Enabled or disabled check box: Locked by hardware
Device reset
Navigation System → Device management → Device reset
Description Use this function to reset the device configuration - either entirely or in part - to a defined
state.
Selection • Not active
No action is executed and the user exits the parameter.
• To factory defaults
All the parameters are reset to the factory setting.
• To delivery settings
All the parameters are reset to the order configuration. The order configuration can
differ from the factory setting if customer-specific parameter values were defined when
the device was ordered.
• Restart device
The device is restarted but the device configuration remains unchanged.
Factory setting Not active