Safety message
TMT180
2
Hauser
Safety message
Instructions and procedures in the operating instructions may require special precautions to ensure
the safety of the personnel performing the operations. Information that potentially raises safety
issues is indicated by safety pictograms and symbols. Please refer to the safety messages before
performing an operation preceded by pictograms and symbols, see chapter 1.5.
Though the information provided herein is believed to be accurate, be advised that the information
contained herein is NOT a guarantee of satisfactory results. Specifically, this information is neither
a warranty nor guarantee, expressed or implied, regarding performance; merchantability, fitness, or
other matter with respect to the products; and recommendation for the use of the product / process
information in conflict with any patent. Please note that the manufacturer reserves the right to
change and / or improve the product design and specifications without notice.
#
Warning!
Failure to follow these installation guidelines could result in death or serious injury.
– Make sure only qualified personnel perform the installation.
Process leaks could result in death or serious injury.
– Do not remove the thermowell while in operation.
– Install and tighten thermowells and sensors before applying pressure.
Electrical shock could cause death or serious injury.
– Use extreme caution when making contact with the leads and terminals.
Brief overview
Using the following short form instructions you can commission your system easily and swiftly:
Safety notes
⇓
Installation
⇓
Wiring
⇓
Display and operating elements
Preparing the communication with PC configuration software
⇓
Instrument configuration (including a description of the unit
functions)
A complete description of all the functions as well as a detailed overview of
the functionality can be found in this chapter.