Endress+Hauser ISEmax CAS40D, Руководство по эксплуатации

Страница: 17 / 32

ISEmax CAS40D Maintenance
Hauser 17
Installing the electrode
1. Screw the electrode into the electrode holder, and hand-tighten using the socket wrench,
SW17, (
→
å
11, but in the opposite direction).
2. Connect the electrode connector to the cable (
→
å
10, opposite direction).
3. Carefully push the electrode holder and the air hose back into the sensor.
4. Screw on the coupling nut (
→
å
9, opposite direction).
5. Screw on the protection guard (
→
å
8, opposite direction).
6. Carry out a calibration (--> "Commissioning/Calibration").