background image

Micropilot FMR50 FOUNDATION Fieldbus

Mounting

Hauser

11

FMR50

Antenna size

40 mm (1½ in)

80 mm (3 in)

100 mm (4 in)

Beam angle α

23°

10°

Distance (D)

Beam diameter W

3 m (9.8 ft)

1.22 m (4 ft)

0.53 m (1.7 ft)

0.42 m (1.4 ft)

6 m (20 ft)

2.44 m (8 ft)

1.05 m (3.4 ft)

0.84 m (2.8 ft)

9 m (30 ft)

3.66 m (12 ft)

1.58 m (5.2 ft)

1.26 m (4.1 ft)

12 m (39 ft)

4.88 m (16 ft)

2.1 m (6.9 ft)

1.68 m (5.5 ft)

15 m (49 ft)

6.1 m (20 ft)

2.63 m (8.6 ft)

2.10 m (6.9 ft)

20 m (66 ft)

8.14 m (27 ft)

3.50 m (11 ft)

2.80 m (9.2 ft)

25 m (82 ft)

10.17 m (33 ft)

4.37 m (14 ft)

3.50 m (11 ft)

30 m (98 ft)

-

5.25 m (17 ft)

4.20 m (14 ft)

35 m (115 ft)

-

6.12 m (20 ft)

4.89 m (16 ft)

40 m (131 ft)

-

7.00 m (23 ft)

5.59 m (18 ft)

5.6  

Free-space installation in vessel

5.6.1  

Horn antenna encapsulated (FMR50)

Alignment

• Align the antenna perpendicular to the product surface.

• A marking is provided on the threaded connection to aid the alignment. This marking must

be aligned towards the tank wall as much as possible.

90°

90°

90°

90°

90°

  A0019434

Depending on the device version the marking may be a circle or two parallel lines.

Содержание FOUNDATION Fieldbus Micropilot FMR50





































Отзывы: