Endress+Hauser EngyCal RS33, Краткое руководство по эксплуатации

Страница: 34 / 40

Operation EngyCal RS33
34 Hauser
6.2.3 "FieldCare Device Setup" operating software
For configuring the device using the FieldCare Device Setup software, connect the device to
your computer's USB interface.
Establishing a connection
1. Start FieldCare.
2. Connect the device to the computer via USB.
3. Generate project via File/New.
4. Select communication DTM (CDI Communication USB).
5. Add device EngyCal
® RS33.
6. Click "Establish connection".
7. Start configuration.
Carry out the rest of the configuration of the device according to these Operating Instructions
for the device. The entire Setup menu, i.e. all parameters listed in these Operating
Instructions, is also included in the FieldCare Device Setup.
NOTICE
Undefined switching of outputs and relays
‣
The device can enter undefined states during configuration with FieldCare! This can result
in undefined switching of outputs and relays.