Endress+Hauser EngyCal RS33, Краткое руководство по эксплуатации

Страница: 21 / 40

EngyCal RS33 Wiring
Hauser 21
• In the case of heat differential /T, the temperature sensor for T condensate must be
connected to the T Warm terminals and the temperature sensor for T steam to the T
Cold terminals.
• In the case of heat differential /p, the temperature sensor for T condensate must be
connected to the T Warm terminals.
Terminal Terminal assignment Inputs
1 + RTD power supply Temperature
(Optionally RTD or current input)
2 - RTD power supply
5 + RTD sensor
6 - RTD sensor
52 + 0/4 to 20 mA input
53 Ground for 0/4 to 20 mA input
3 + RTD power supply Pressure
4 - RTD power supply
7 + RTD sensor
8 - RTD sensor
54 + 0/4 to 20 mA input
55 Ground for 0/4 to 20 mA input
10 + pulse input (voltage) Flow
(Optionally pulse or current
input)
11 - pulse input (voltage)
50 + 0/4 to 20 mA or current pulse (PFM)
51 Ground for 0/4 to 20 mA input flow
80 + digital input 1 (switch input) • Start tariff counter 1
• Time synchronization
• Lock device
81 - digital input (terminal 1)
82 + digital input 2 (switch input) • Start tariff counter 2
• Time synchronization
• Lock device
81 - digital input (terminal 2)
Outputs
60 + pulse output 1 (open collector) Energy, volume or tariff counter.
Alternative: limits/alarms
61 - pulse output 1 (open collector)
62 + pulse output 2 (open collector)
63 - pulse output 2 (open collector)
70 + 0/4 to 20 mA/pulse output Current values (e.g. power) or
counter values (e.g. energy)
71 - 0/4 to 20 mA/pulse output
13 Relay normally open (NO) Limits, alarms