Endress+Hauser CNGmass, Краткое руководство по эксплуатации

Страница: 28 / 32

System integration CNGmass
28 Hauser
9 System integration
For information on system integration, see the Operating Instructions for the device
→  11.
10 Commissioning
10.1 Function check
Before commissioning the device, make sure that the post-installation and post-connection
checks have been performed.
• "Post-installation check" checklist →  16
• "Post-connection check" checklist →  25
10.2 Establishing a connection via FieldCare
• For FieldCare connection →  26
• For establishing a connection via FieldCare →  27
10.3 Configuring the measuring device
The Setup menu with its submenus is used for fast commissioning of the measuring device.
The submenus contain all the parameters required for configuration, such as parameters for
measurement or communication.
Submenu Meaning
System units Configuring the units for all measured values
Medium selection Defining the medium
Communication Configuration of the digital communication interface
Low flow cut off Configuring the low flow cut off
Partial filled pipe detection Configuring the monitoring of partial and empty pipe
detection
10.4 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a unique
designation using the Device tag parameter and thus change the factory setting.
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the
measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /). CNGmass