Cerabar S 4 to 20mA HART
Description of parameters
Hauser
29
P01-MIDxxxxx-19-xx-xx-EN-014
Fig. 12:
PROCESSINFO group
For function group PROCESS VALUES, measuring mode "Pressure", see Page 29, Table 12
2)
1)
1)
PRESSURE
CORRECTED PRESS.
SENSOR PRESSURE
SENSOR TEMP.
MEAS. VAL. TREND
MEASURED VALUE
Pressure
PROCESS VALUE
PROCESS INFO
TOTALIZER SETUP
LANGUAGE
SETTINGS
POSITION ADJUSTMENT
OPERATING MENU
GROUP SELECTION
Measured value
1) Display via on-site display only
2) Display via digital communication
Level (not
for PMP71 with MID)
provided
Table 12: (GROUP SELECTION
) OPERATING MENU
PROCESSINFO
PROCESS VALUES "Pressure"
Parameter name
Description
Prerequisite
:
• MEASURING MODE = Pressure
MEASURED VALUE (679)
Displays the measured value
In the "Pressure" measuring mode, this value corresponds to the PRESSURE parameter.
Prerequisite:
• Digital communication
Onsite operation:
• In the case of local operation, the MEASURED VALUE parameter is displayed on the
top level.
