Endress+Hauser Cerabar S PMP7, Руководство по эксплуатации

Страница: 28 / 56

Description of parameters Cerabar S 4 to 20mA HART
28 Hauser
FILL FLUID For selecting and displaying the diaphragm seal fill fluid.
Prerequisite:
• Digital communication
Table 11: (GROUP SELECTION

) OPERATING MENU

TRANSMITTER INFO

SENSOR DATA
(all measuring modes)
Parameter name Description
SENSOR SER. No. (250)
Display Displays the serial number of the sensor (11 alphanumeric characters).
PRESS. SENS LOLIM (484)
Display Displays the lower measuring limit of the sensor.
PRESS. SENS HILIM (485)
Display Displays the upper measuring limit of the sensor.
MINIMUM SPAN (591)
Display Displays the smallest possible span.
SENSOR MEAS.TYPE (581)
Display Displays the sensor type.
• Cerabar S with absolute pressure sensor = Absolute
MAT. MEMBRANE (365)
Display Displays the material of the process isolating diaphragm.
Factory setting:
as per version in order code

See Technical Information for Cerabar S TI00383P, Section "Ordering information".
FILLING FLUID (366)
Display Displays the filling fluid.
Tmin SENSOR (368)
Display Displays the lower nominal temperature limit of the sensor.
Tmax SENSOR (369)
Display Displays the upper nominal temperature limit of the sensor.
SENS H/WARE REV (487)
Display Displays the revision number of the sensor hardware.
e.g.: 1
Table 10: (GROUP SELECTION

) OPERATING MENU

TRANSMITTER INFO

PROCESS CONNECTION
Parameter name Description