Endress+Hauser ASP Station 2000 RPS20B Скачать руководство пользователя

Страница: 13 / 60

ASP Station 2000 RPS20B

Incoming acceptance and product identification

Hauser

Incoming acceptance and product identification

4.1

Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.
 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

CAUTION

Incorrect transportation may result in injuries or damage to the device.

‣

Transport the sampler using suitable lifting equipment, e.g. pallet truck or forklift truck.

‣

Do not lift the sampler by the roof.

4.2

Product identification

4.2.1

Nameplate

Nameplates can be found:

• On the inside of the body

• On the packaging (adhesive label, portrait format)
The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Safety information and warnings

‣

Compare the information on the nameplate with the order.

4.2.2

Product identification

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Содержание ASP Station 2000 RPS20B





























































Результаты поиска

Содержание ASP Station 2000 RPS20B

Отзывы:

Похожие инструкции для ASP Station 2000 RPS20B

Бренды по названию

Популярные бренды

Endress+Hauser ASP Station 2000 RPS20B, Руководство по эксплуатации

Результаты поиска

Содержание ASP Station 2000 RPS20B

Отзывы:

Похожие инструкции для ASP Station 2000 RPS20B

Бренды по названию

Популярные бренды