Endorphines TWO OF CUPS, Инструкция по эксплуатации

Страница: 8 / 13

more than 24 samples per voice as only first 24 samples from alphabetically sorted
list of files will be played. All the samples including 25
th
in the list will be
ignored.
PARAMETERS SAVE
TO SAVE the position of the Parameter knob in any mode, quickly run through the
modes by short pressing the MODE/BANK button THREE TIMES . The next time you
power up the module those edits you made will be restored independently for each
bank and voice.
SAMPLE BANKS
Two of Cups has 8 banks of samples, each bank holds 24 samples per voice. To
switch to the next bank, press and hold the
MODE/BANK button for 1 second.
Audio files need to be 8 or 16 bit PCM WAVE files and can be of any (arbitrary)
sample rate up to 96kHz. The samples are sorted in each folder of SD card by the
module alphabetically and if we have more than 24 samples in the voice folder, only
first 24 will be played.
You can see which bank is selected by the color and number of blinks of the LED.
●
BANK 1
●●
BANK 2
●●●
BANK 3
●●●●
BANK 4
●
BANK 5
●●
BANK 6
●●●
BANK 7
●●●●
BANK 8
For example, BANK 1 will be shown by 1 blink of LED with BLUE color, BANK 2 will
blink BLUE twice and BANK 4 will blink BLUE 4 times. BANKS 5­8 will blink RED 1­
4 times correspondingly.
SD CARD / SETTINGS
FW V2
Apart from the samples, the SD card contains configuration files in the sd/settings/
folder for 1v/oct Pitch CV scaling, Offset and Trigger delay, which are applied
globally for every bank. These settings files are created automatically upon new
firmware update and can be changed in the text editor. After you delete them, the
module will create them again with default values. If you can’t find those files,
simply update the latest firmware for your Two of Cups and the module will create
them on the next power up.