Endorphines GROUND CONTROL, Руководство пользователя

Страница: 36 / 53

MODULATION
DESTINATION
SELECTED WITH
PAGE ⯈
EXTRA
SETTINGS
WITH
/­
SHOWN
ON
DISPLA
Y
MODULATIO
N RANGE
EXPECTED CV RANGE
PATTERN SHIFT D.1...8, T.1…3 SHFT +/­64 steps increasing voltage on 1v, shifts on 12
steps, or 0.833V per step
SEMITONE
OFFSET T 1…3 SEMI +/­5 octaves voltage added from the jack quantized to
semitones and adds to pitch CV outputs.
Also those influences on the MIDI notes
outputs
OCTAVES OFFSET T 1…3 OCTS +/­5 octaves same as above, just the CV inputs
applied to octaves: i.e. when CV from 0 to
+1V then no change, when CV from +1
to +2v, then shifts 1 octave up etc up to
5 octaves and similar in negative range
SHUFFLE
AMOUNT D.1...8, T.1…3 SHFL ­50…+50 CV values ­5 to +5v correspond to ­50 to
+50 shuffle values
PROBABILITY D.1...8, T.1…3 PROB 0…100 Accepts only positive CV values: 0 to +5V
which correspond to 0 (none) to 100%
(max.) tracks probability / notes skipped
RATCHETS D.1...8, T.1…3 RATC 0...4 5 values: 0 to 4 scaled to 0 to 5v sectors
(0­1, 1­2, 2­3, 3­4, 4­5). Value of 0
ratchets doesn't output the note at all,
value of 4 repeats the note on its step 4
times)
SLIDE D all / T1…3 SLDE 0...100 Accepts only positive CV values: 0 to +5V
which correspond to 0 (none) to 100%
(max.) longest portamento slide time
GATE LENGTH D.1...8, T.1…3 GATE 0…100 Defines the gate/trigger length of a
certain drum drigger or melodic track.
Accepts only positive values 0 to +5V
which correspond from 0 to 100% (max)
CC VALUE
UNIPOLAR CC#1…127 CC.UN 0…127 Basically works as CV to MIDI CC#
converter. Unipolar means that CV
accepts only 0 to +5V range which
converts from 0 to 127 defined CC#
value. CV=0v corresponds to CC value 0
CC VALUE
BIPOLAR CC#1…127 CC.BI 0…127 Same as above, just CV accepts bipolar
values ­5…+5v converted to 0…127
CC# values, CV=0v corresponds to CC
value 63.
MIDI channel corresponds to the track’s
name which that track is assigned to.
E.g. if CC assigned to CV 1, then it
follows Track 1 MIDI channel: 1 by
default

Once we have assigned something to one CV input – same setting for exactly
same trigger is excluded with the list in other CV sources. I.e. once we
assigned CV1 to Shuffle of Track1, we cannot assign CV2 to the Shuffle of the
same Track1, but Track D, 2 and 3 only