Endorphines GROUND CONTROL, Руководство пользователя

Страница: 35 / 53


FRWD : means FORWARD – typical direction from first step 1 to the last step
and then again returning to the first and so on.

REWD : means REWIND – direction from the last step to the first step 1 and
then again returning to the last and so on.

PEND : means PENDULUM – is a combination of first forward and then
backward movement.

RAND : means RANDOM – each next step the sequencer is selected is random
of track’s set steps.

RSTP : means RANDOM STEP – on each step sequencer decides if it goes
forward or backwards.
Whatever direction you choose, keep in mind that once you choose another
pattern, it will be switched once the current pattern will finish its full cycle. In
FORWARD mode that means once the pattern will reach its last step, the next
step will be the first step from new pattern. In BACKWARD mode the pattern
should reach its first step and then will be switched to the new pattern. In
PENDULUM mode the pattern should go forward and then backward and only
then will be switched to the next pattern – i.e. will pass twice more steps before
the switch. In
RANDOM and RANDOM STEP modes the logic is simple – the
switch to the new pattern will occur after initiated and once the pattern will pass
the full number of its set steps (by default 16).
E / EXT. CV
FW V.2
In that menu with the buttons TRACK D/1/2/3 we select the CV jack source.
Then with ⯇ PAGE ⯈ buttons you select the following MODULATION
DESTINATIONS with additional parameters like tracks selected via
TR/- buttons.