Endon Lighting
LS9 0SE
These assembly diagrams are intended as a guide – if in doubt consult a qualified electrician.
Assembly / user instructions
W28 14
Diagram A
Diagram B
Diagram C
1. Determine the position of
your light fitting. Ensure that
there is sufficient power
cable to connect to the
fitting – we recommend at
least 20cm.
2.
Diagram A
. Secure the
terminal block bracket to the
lower section of the post.
3.
Diagram B.
Connect the
mains supply cable to the
internal terminal block – see
wiring details.
IMPORTANT:
This is a
Class I fitting and MUST
be earthed
.
4.
Diagram C
. Secure the
lamp post to the mounting
surface making sure that
the internal cables are not
trapped or damaged.
5.
Diagrams D and E
. Fit the
bulb –
never fit bulbs of a
higher wattage or of a
type other than those
specified on the label as
this may cause over
heating
and damage the
fitting
. Fit the lid.
6. Turn on the power and
test.
Diagram D
Diagram E
