Endo SBS3N, Инструкция по эксплуатации

Страница: 8 / 11

Model
：
SBS3W/SBS3N Model
：
SBS5W/SBS5N
Fig.2
CAUTION: Initial tension indicates the number of revolutions of the spindle when wire
rope is fully retracted into drum.
Use in the range of dotted line will lose balance.
5. Safety instructions on use
Fig.3
WARNING
●
Never use overhead or at the place might lead to injury accident when load dropped.
●
Never place hands, feet, etc., under suspended loads or movable range of each rope.
●
Never alter the balancer.
CAUTION
●
Always use within maximum spring tension.
●
Always adjust the spring tension before use.
●
Do not extend the rope past the maximum cable travel.
●
Do not pull the rope at an angle.
●
Fix main body so that rope does not touch to wire guide. It will cause recovery
problem resulting in uneven winding.
●
Fix main body with M5 bolt.
●
Adjust the length of bolt inside main body to 8-10mm from aspect with plate,
6-10mm from side of case.(see Fig.3)
●
Fix the bolt with 2.4N
・
m torque.
Copied
digital
data
from
http://www.endo-kogyo.co.jp/