Endless Pools X2000 SwimCross, Руководство пользователя

Страница: 22 / 36

Page 19
WI-FI
(OPTIONAL)
This menu allows you to connect
your in.touch module to a Wi-Fi
network or to change its network.
This menu is only visible when the
in.touch module is installed.
To connect your in.touch module to
a wireless network, use the or
buttons to go to the Wi-Fi
option in the Settings menu and
(middle left) lit button to
select it.
After a few seconds the available networks will appear on the screen, as
well as their signal strength.
Use the or buttons to move through the list. Select your network
by pressing the middle left button .
If the Wi-Fi network is password protected enter it when prompted.
• Use the or buttons to choose your letters.
• Use
(lower right) lit button to move the curser forward.
• Use (top right) lit button to change the type of character.
(uppercase, lowercase, number, symbol).
• Use
(lower left) lit button to backspace.
• Use (middle left) lit button to confirm.
If no password is required the in.touch
will connect automatically.
Once the in.touch module is connected
to a Wi-Fi network a green check mark
will appear in the Wi-Fi menu, and
the network name will appear in the
Settings menu.
INVERT SCREEN
Press the (lower left) button to invert screen.
When you change the display orientation, the contextual
options and or buttons adjust to the chosen
orientation. The Setting buttons remain unchanged, as
well as the jets and lights buttons in the home page.
TEMPERATURE CONTROL
The set temperature range is from 15°C to 40°C (59°F to 104°F). (The
water temperature of the spa side may rise or lower slightly depending
on the current use and condition of your exercise system and on
outside temperatures.)
The set temperature of the spa side water will automatically be 38.0°C
(100°F) the first time power is applied. This is the setting programmed
at the factory. After the spa side has been set up and used, the last
temperature value set by the user will be stored in memory. If power is
disconnected from the exercise system, it will automatically revert to the
last set temperature when power is reapplied.
To display the set temperature of the spa side:
Press the or buttons
on the control panel in the
home screen.
To increase the set
temperature of the spa side:
Press the button in the
home screen. The set point
will appear in blue. After 3
seconds without any change
to the set temperature value,
the current water temperature will reappear in white.
To decrease the set temperature of the spa side:
Press the button in the home screen. The set point will appear in blue.
After 3 seconds without any change to the set temperature value, the
current water temperature will reappear in white.
JETS CONTROL
When pressed, the top and middle button on the left side of the screen will
activate the jets when in the home screen. If left running, the pumps will
automatically turn off after 2 hours.
HYDROMASSAGE JETS
Turn the hydromassage jet pumps On
to activate the hydromassage jets on
the spa side as well as the spa side
waterfall if the waterfall valve is open
and jet 1 is on.
Press (Top left) jet button to activate
some of the hydromassage jets, you will
see the jet 1 icon on the screen rotate.
Press
(Top left) jet button a second
time to shut the hydromassage jets off.
Press (middle left) jet button to activate the hydromassage jets that
were not activate by jet 1, you will see the jet 2 icon on the screen rotate.
Press
(middle left) jet button a second time to shut the
hydromassage jets off.
Operating Instructions