Operating Instructions
________________________________________________
Function of Controls
1.
Mains Inlet
Mains inlet with integral line filter. Ensure
the IEC connector on the mains lead is pushed fully into the
mains inlet.
2.
Mains Switch
This controls the electrical power on the
equipment. The side marked 1 is On and the side marked O is
Off.
3.
Mains Connected Indicator
This indicates electrical
power is connected to the equipment, even though the Mains
switch (2) is in the OFF position. The l.e.d. is illuminated when
the IEC connector is pushed fully into the inlet and power is
switched on at the local outlet. If the l.e.d. fails to light with the
local outlet switch in the On position then a Fuse (6) has blown
or power is not present at the mains.
4.
Mains Power Indicator
This l.e.d indicates that power has
been switched ON at the mains switch (2). The shaker will
operate when the appropriate actions are taken.
5.
Process Timer
This is a mechanical 0-60 minute timer
which also provides continuous running (for settings of less
than 15 minutes rotate the knob past the 15 minute mark and
then back to the desired setting). Operating periods are
increased by rotating clockwise and decreased by rotating
anti-clockwise (the timer will commence timing down as soon
as the knob is released, regardless of electrical power being
connected or not).
- 10 -
