Endace DAG 9.2X2, Руководство пользователя

Страница: 48 / 86

EDM01-36v10 DAG_9.2X2_Card_User_Guide - Using your DAG card
42 ©2010 - 2012 Endace Technology Ltd. Confidential - Version 10 - May 2012
--plugin
<testname:"-p1 -
p2 ... -pn">
Plug-in test to be loaded, including test parameters (p1, p2, etc)
See list of
tests (page 42) below.
--rxstreams <n>
Number of streams in capture file (for steer -H2).
--stream <n>
Stream number file was captured from (for steer -H2).
--nni
Set ATM network interface to NNI (default UNI).
--tcp_ip_counter
Print TCP Flow and IP Address Counter ERF records.
dagbits tests
The following
dagbits
tests are available for use. Tests not listed in the following table are for Endace
use only.
Test Description
decode Decode and print IP, TCP, UDP and ICMP headers.
delta Print timestamp differences, if used with --delta-min --delta-max , this tests
timestamp differences with the provided min/max value.
fcs Test Frame Check Sum on each ERF frame.
flags Check and accumulate in-band packet error indications (these are considered to be errors
and return 1).
ipsum Verify IP checksum.
jitter Check if timestamp difference variation between consecutive rec pairs is smaller than
t/2^32 sec.
lctr Check and accumulate in-band packet loss indications (not considered an error -- will
return 0).
mono Check for monotonically increasing timestamps.
print Print rec timestamp, CRC, ATM header and payload.