EDM 01-11v8 DAG 6.1S Card User Guide
©2005
22
Version 8: May 2006
4.7 Inspect 10G Ethernet Interface Statistics
, continued
Correct
configuration
In order to correct the configuration, proceed as follows:
•
Ensure RAI, RLE and RPA (first three columns) are zero, check
light levels
•
Ensure no bip errors occur, otherwise check cabling and light levels
•
Ensure the scrambling and CRC settings are ok
Little or no
data
information
On WAN links it can happen that there is very little or no data information
received. This typically indicates incorrect scrambling settings. While a
default that matches typical link settings is provided, the actual
configuration varies from network to network.
In this situation, vary the
pscramble
option and retry.
