Endace DAG 4.5G2 Card, Руководство пользователя

Страница: 15 / 46

EDM 01-18 DAG 4.5G2/G4/GF Card User Guide
Chapter 2:
Installation
Introduction
The DAG 4.5 card can be installed in any free PCI-X slot. It operates at
66MHz, 100MHz or 133MHz PCI-X mode but will not operate in 32-bit or
64-bit PCI slots. Higher speed slots will achieve better performance.
Although the DAG driver supports up to sixteen DAG cards in one system,
the DAG card makes heavy use of PCI-X bus data transfer resources.
Therefore bandwidth limitations mean you should not have more than one
card on a single PCI-X bus.
DAG Device
Driver The DAG device driver must be installed before you install the DAG card.
If you have not already completed this please follow the instructions in
EDM04-01 Linux FreeBSD Software Installation Guide or E DM 04-02
Windows
®
Software Installation Guide as appropriate, which are included on
the CD shipped with the DAG card.
Inserting the
DAG Card Caution: It is very important to protect both the PC and the
DAG card from damage by electro-static discharge (ESD).
Failure to do so could cause damage to components and
subsequently cause the card to partially or completely fail.
•
Turn power to the computer OFF,
•
Remove the PCI bus slot screw and cover,
•
Using an approved ESD protection device attach the end with the strap to
your wrist and pull or clip firmly so there is firm contact with your wrist,
•
Securely attach the clip on the other end of the strap to a solid metal area
on the PC chassis as shown below,
•
Insert the DAG card into PCI bus slot ensuring it is firmly seated ,
•
Check the free end of the card fits securely into the card-end bracket that
supports the weight of the card,
•
Secure the card with the bus slot cover screw,
•
Turn power to the computer ON.
Anti-static
wrist strap
Clip secured
to chassis
©2005-2006 9 Version 4: August 2006