Endace Measurement Systems Ltd
EDM01.05-01r1 DAG 4.3GE Card User Manual
www.endace.com
2.2 Insert DAG 4.3GE Card into PC
, continued
Procedure
, continued
Step 2.
Fit Card
Insert DAG 4.3GE card into PCI-X bus slot.
Step 3.
Replace bus Slot Screw
Secure card with screw.
Step 4.
Power Up Computer
2.3 DAG 4.3GE Card Port Connectors
Description
There are two duplex LC-type optical port connectors. Each port consists
of an optical fibre transmitter and receiver.
The upper connection of each pair is for transmitting signals. They are
connected only if loop-back facility is used in the DAG to daisy-chain the
systems. They are also connected if a data generation program is being
used.
The bottom connectors for each pair are used for the received signal.
An 8-pin RJ45 socket is used for time synchronization. This socket
should never be connected to an Ethernet network or telephone line.
2.4 Pluggable Optical Transceivers
Description
Some newer versions of the DAG 4.3GE cards are available with
pluggable optics. To provide compatibility with the broadest possible
range of optical parameters, Endace offers the industry standard Small
Form-factor Pluggable [SFP] optical transceiver on the DAG 4.3GE card.
The SFP transceiver consists of two parts:
•
Mechanical chassis attached to the circuit board
•
Transceiver unit which may be inserted into the chassis
The correct transceiver is chosen to suit the optical parameters of the
target network installed in the chassis.
The transceiver may then be connected to the network via LC-style optical
connectors.
Further information about the Pluggable Optical Transceiver is available
at the Endace
http://www.endace.com/dagPluggable.htm
Continued on next page
Copyright© All rights reserved
6
Revision 6. 22 September 2005.
Содержание DAG 4.3GE
Страница 1: ...EDM01 05 01r1 DAG 4 3GE Card User Manual...