uPL
Hy5
C.Fos
C.Fos
C.Fo5
uPL
6. The Hidden Menu
While in “User Menu”, if key is pressed for 7 seconds the message is displayed and hidden
menu is enterd and then
parameter is displayed. Selected the parameter’s value can be
upl
displayed by pressing key and can be changed with keys. Parameter accessing and saving
functions can be performed like a "User Menu". All parameters can be accessed from this menu.
If keys are pressed together for 2 seconds; parameter is transferred to the user menu. In this way
up to 8 parameters can be transferred to the "User Menu".
7. How can we to transfer parameter between menus?
Program Mode
ERROR MESSAGES
P5C
Pfa
ALARM SITUATION
5. Changing Parameter Values
4. Activating / Inactivating The Control Outputs
C.dI5
CENB
When in the "Running mode", if key is pressed for 2 seconds,
message is displayed and control outputs becomes to the inactive position, the device
C.dI5
works as the indicator. When the control outputs are disabled; if key is pressed for 2 seconds
is disabled and the device continues to control function.
C.EnB
If keys are pressed together for 2 seconds is displayed and “User Menu” i s entered, then first parameter’s name is displayed in the user menu.
While a parameter is selected, by pressing key, parameter value can be displayed. This parameter can be changed with keys. If no operation
performed for 3 seconds or during this time, key is pressed while parameter value displayed, parameter name will be displayed again. While parameter name
displayed, if by pressing together keys, "Running Mode" is entered.
1000
-
24.0
The control ouput becomes inactive.
The control output becomes active.
EA
SET
SET
SET
SET
In “User Menu” if keys are pressed together for 2 seconds, parameter is removed from “User Menu.
When a parameter is displayed “User Menu”, F LED lights up in hidden menu. If there is no parameter in
°
"User Menu",
message is displayed.
nP
SET
1000
-
24.0
SA
Means, thermostat probe is broken.
Temperature value is higher than the scale.
Means, thermostat probe is short circuit.
Temperature value is lower than the scale.
1.
Measurements shown flashes when the alarm condition occurs and if
parameter is not , audible warning is heard.
5ND
0
2.
External alarm is active but the outputs are unaffected.
3.
External alarm is active and in this state, specifies that the relay outputs are turned off (off state).
While warning, by pressing key, audible warning can be temporarily disabled.
FACTORY SETTINGS
If key is held down while the device is powered up,
message appears and factory parameters restored.
d.PAr
DEFROST LED :
With the defrost lights up.
SET
FAHRENHEIT LED :
F”
In parameter value or the measured temperature value “
unit while this LED
°
lights up. In the hidden menu at the same time the user menu parameter is shown the LED lights up.
COMPRESSOR LED :
If compressor output is active, this LED lights up. While these compressor
delays expected, this LED flashes.
In "Running Mode", indicates the set value.
In “Programming Mode”, indicates the selected parameter value.
While in "Programming Mode", provides the transition to the next parameter. If parameter is being
adjusted, it increases parameter’s value. Constantly holding this key, the parameter value rapidly
increases.
While in "Programming Mode", provides the transiton to the previous parameter. If parameter is
being adjusted, it decreases parameter’s value. Constantly holding this key,the parameter value
rapidly decreases.
HEATING LED
:
Heating is being checked; while the output is active, the LED lights.
FRONT PANEL COMMANDS
1. Viewing and Changing The Set Value
Measurement
value
-
30.0
-
29.9
-
30.0
1000
-
24.0
SET
While in "Running mode", if key is pressed set value is displayed for 3 seconds. While in this case, the set value is changed with keys.
SET
Loc
unl
1000
-
24.0
SET
Keys are locked.
Keys are unlocked.
SET
SET
SET
SET
While in "Running Mode", if keys are pressed together for 2 seconds,
message is displayed and the keys are locked. If the keys are locked
Loc
keys are pressed for 2 seconds again,
message is displayed and keys are unlocked. While keys are locked and if key is pressed, set value can be
unL
displayed but can not be changed. While the keys are locked and if any key is pressed
,
message appears.
( except key )
Loc
2. Locking and Unlocking Keys
3. Manuel Defrost Process
While in the "Running Mode", if key is pressed for 2 seconds, defrost process starts manually. If
parameter is
, manual defrost will be inactive.
0
d.dur
*
When in the "Running Mode", if the control outputs
are inactive,
message appears periodically.
oFF
°F
.
Measurement
value
Measurement
value
While warning, by pressing any key, audible warning can be temporarily disabled.
2 / 4
.
EDT2411A-EN-10052019
EDT2411A