29
www.encore-usa.com
B4.2.
WPS — PIN (Personal Information Number)
Personal Information Number (PIN) allows your computer to connect to a wireless network
by entering the adapter’s PIN code to your router or access point. Unlike wireless network
security passwords, you do not need to memorize the PIN code.
Please check the user
manual of your router or access point to see if it supports WPS - PIN.
Note:
To enter your adapter’s PIN code to your router or access point, you need to know
your router or access point’s IP address.
In addition, you need to have one of the following:
A computer
directly connects to the router or access point through wired
connection.
This computer can be the one with ENLWI-NX2 or ENLWI-1XN4x
installed on or a different one
.
A computer
already connects to the router or access point through wireless
connection.
For example, this could be your laptop computer.
A.
1.
Go to the “
Wi-Fi Protected Setup
” tab.
2.
Click on “
Pin Input Config (PIN)
”
3.
Within two minutes
, enter
ENLWI-NX2
or ENLWI-1XN4x’s
PIN code into
your
router or access point’s Web-based
Utility through a web browser.
Note:
To complete
Step 3
, you need to
know your router or access point’s
IP
address
to access its Web-based Utility.
B.
Once connected, the tab will
automatically switch to the “
General
”
tab. The ‘
Signal Strength
’ and ‘
Link
Quality
’ bars will become active and
green.
Note:
The ‘
Encore Wireless Manager
Tray Icon
’ at the lower right corner of the
screen will become green as well.
