WPS
WPS Configuration: The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple
Configuration) is to simplify the security setup and management of Wi-Fi networks.
This adapter supports the configuration setup using PIN configuration method or
PBC configuration method through an internal or external Registrar.
WPS AP List
Display the information of surrounding APs with WPS IE
from last scan result. List information include SSID,
BSSID, Channel, ID (Device Password ID),
Security-Enabled.
Rescan
Click to rescan the wireless networks.
Information
Display the information about WPS IE on the selected
network. List information include Authentication Type,
Encryption Type, Config Methods, Device Password ID,
Selected Registrar, State, Version, AP Setup Locked,
UUID-E and RF Bands.
PIN Code
8-digit numbers. It is required to enter PIN Code into
Registrar using PIN method. Each Network card has only
one PIN Code of Enrollee.
Config Mode
Enrollee or an external Registrar.
Table of Credentials
Display all of credentials got from the Registrar. List
information includes SSID, MAC Address, Authentication
and Encryption Type. If STA Enrollee, credentials are
created as soon as each WPS success. If STA Registrar,
RaUI creates a new credential with
WPA2-PSK/AES/64Hex-Key and doesn't change until
next switching to STA Registrar.
Detail
Information about Security and Key in the credential.
Connect
Command to connect to the selected network inside
credentials.
Rotate
Command connect to the next network inside
credentials
24