Chapter 2: Getting Started
2.1 Connecting the ENUTV-ADDT
To install the ENUTV-ADDT into your computer, follow the steps below:
1. Connect the TV antenna cable to the
connector.
NOTE:
Do not insert the ENUTV-ADDT
TV tuner to the PC USB Port at this time
yet.
2.2 Device Driver Installation
Place the Setup Disc that came with the ENUTV-ADDT in the CD-ROM drive, then follow
the on-screen installation guide steps below.
1. Insert the Setup Disc CD into the
CD-ROM drive. The setup screen you
see on the left hand side of this page
will automatically appear.
2. Click the “
Setup Driver
” button.
3. Click
“
Next
” to start the driver
installation.