Encore ENDSL-A2+WIG2 Скачать руководство пользователя страница 61

Страница: 61 / 84

optimization.

(1) Port-Based VLAN: each physical switch port is configured with an access list specifying

membership in a set of VLANs.

(2) ATM VLAN-using LAN Emulation(LANE) protocol to map Ethernet packets into ATM cells

and deliver then to their destination by converting an Ethernet MAC address into an ATM

address.

The key for the IEEE 802.1Q to perform the above functions is in its tags. 802.1Q-compliant

switch ports can be configure to transmit tagged or untagged frames. A tag field containing VLAN

(and/or 802.1p priority) information can be inserted into an Ethernet frame. If a port has an

802.1Q-compliant device attached (such as another switch), these tagged frames can carry

VLAN membership information between switches, thus letting a VLAN span multiple switches.

However, it is important to ensure ports with non-802.1Q-compliant devices attached are

configured to transmit untagged frames. Many NICs for PCs and printers are not

802.1Q-compliant. If they received a tagged frame, they will not understand the VLAN tab and

will drop the frame. Also, the maximum legal Ethernet frame size for tagged frames was

increased in 802.1Q (and its companion, 802.3ac) from 1518 to 1522 bytes. This could cause

network interface cards and older switches to drop tagged frames as “oversized”

Assign VLAN PVID for each interface:

You can assign ATM VC, Ethernet (LAN) port, and

Wireless LAN port’s PVID in this section.

Define VLAN Group:

Based on each VLAN group, you can configure each group’s VLAN

setting. You can configure up to 8 VLAN settings.

Содержание ENDSL-A2+WIG2





















































































Результаты поиска

Содержание ENDSL-A2+WIG2

Отзывы:

Похожие инструкции для ENDSL-A2+WIG2

Бренды по названию

Популярные бренды

Encore ENDSL-A2+WIG2, Руководство пользователя

Результаты поиска

Содержание ENDSL-A2+WIG2

Отзывы:

Похожие инструкции для ENDSL-A2+WIG2

Бренды по названию

Популярные бренды