If you wish to restart the router using the factory default settings (for example, after a
firmware upgrade or if you have saved an incorrect configuration), select
Factory Default
Settings
to reset to factory default settings. Otherwise, you can select
Current Settings
. You
may also reset your router to factory settings by holding the
DEFAULT
button on the back
panel of your router in for 10-12 second while the router is turned on.
4.6.5 Diagnostic
The
Diagnostic Test
page shows the test results for the connectivity of the physical
layer and protocol layer for LAN & WAN sides.
Note:
1) User ONLY can view
PVC0
’s Diagnostic Test connection.
2)
“Testing ADSL Synchronization”
might take 30 sec to execute the Diagnostic Test.
70
Содержание ENDSL-A2+4R2
Страница 1: ...ENDSL A2 4R2 ADSL2 Modem Four Port Full Rated Router User s Manual JULY 2007...
Страница 12: ...Figure 1 For Windows Vista Figure 2 For Windows 2000 and XP Figure 3 For Windows 98SE and ME 11...
Страница 19: ...3 3 Configure TCP IP For Windows 98SE and ME 18 Step 1 Click Start then Settings and choose Control Panel...
Страница 41: ...After you enter User ID and Password the main webpage will show as below 40...
