Encore ENDSL-A2+4R2, Руководство пользователя

Страница: 33 / 80

Configure IP Address Manually :
Step 7: Select Use the following IP address and Use the following DNS server
addresses .
IP address : Fill in IP address 192.168.1.x (x is a number between 2 to 254).
Subnet mask : Default value is 255.255.255.0.
Default gateway : Default value is 192.168.1.1.
Preferred DNS server : Fill in preferred DNS server IP address.
Alternate DNS server : Fill in alternate DNS server IP address.
You can use ping command under DOS prompt to check if you have setup TCP/IP
protocol correctly and if your computer has successfully connected to this router.
2) Type ping 192.168.1.1 under DOS prompt and the following messages will appear:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 times<2ms TTL=64
Reply from 192.168.1.1: bytes=32 times<1ms TTL=64
Reply from 192.168.1.1: bytes=32 times<10ms TTL=64
If the communication link between your computer and router is not setup correctly, after
you type ping 192.168.1.1 under DOS prompt following messages will appear:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
32
This failure might be caused by cable issue or something wrong in configuration procedure.