E4 OP REV.A1
9
Channel 5 is user-programmable timer output. You may program the built-in timer to send a ground
signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used
to turn on the headlight, power window or sunroof.
U. POWER SAVER MODE (Default OFF) * See advanced user mode
Under Menu mode press
button while
“POWER SAVE”
icon flash, press
button Power save ON,
while the power save mode, the LCD remote
transceiver use “0” current to save the battery power. Press
button Power save OFF
Exit: Press any button of the LCD remote transmitter to exit “Power Save Mode”.
V. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the
power is lost and then reconnected.
W. SECOND VEHICLE SECURITY OPERATION:
Your 4-button remote transmitter can be utilized to control a second vehicles security system, To program the
remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.
* For the standard
1 way Transmitter by press button
+
is shift button.
Standard Transmitter
1. Prior to pushing any button on the transmitter. Press
button
+
first on the transmitter.
2. Once
button
+
is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the
second transmitter pin code has built-in.
3.
While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle
security system.
ADVANCED USER’S MODE:
LCD REMOTE TRANSCEIVER OPERATION:
Transmitter button
LCD
Feature & remark
Press
+
Backlight turns on for 3 seconds
Press & Hold
+
for 2
seconds (until 1 chirp is heard)
U 01
Press & Hold
+
for 2 seconds (chirp one time )
LCD display show U: 01 =
enter
1
programming of
LCD Remote
Press
button
Press
button =
check the vehicle’s status.
Press
button
Press
button =
check the system trigger
condition
Press
button
Press
button =
check the vehicle’s temperature.
Press
button
PRESS
button FOR OPTION OF CAR 1 / CAR 2
Press & hold
button for 2
sec.
on =
Button Lock
Press & hold
button for 2 sec.
Button Lock
On (1
beep) / Off (2 beep, default = Off)
Press & hold
button for 2
sec.
Press & hold
button for 2 sec. Vibrator or Melody
mode selection (default = Melody)
Press & hold
button for 2
sec.
Press & hold
button for 2 sec. Fast Count Down
Timer (Off / 10m/ 20m/30m/1HR / 1.5HR / 2HR)
Press & hold
button for 2
Press & hold
button for 2 sec. Button Beep Sound
