E4 OP REV.A1
10
sec.
mode Enable (1 beep) / Disable (2 beeps, default =
disable)
Table 2: two beeps to confirm
Transmitter button
LCD Display
System feature & remark
Press & hold button
+
for 3 seconds
(Two chirps will be
heard)
12 is flashing
clock time adjust
or
button
to decrease or increase “Hour” digit,
adjust hour from 0 to 12.
Complete adjust “Hour, “Press
button.
00 is flashing
or
button -
Adjusts clock “Minute” from 0 to
59.
Press
button complete clock setting.
Alarm Clock adjust
12 is flashing
or
button to decrease or increase “Hour” digit,
adjusts clock hour from 0 to 12.
Complete adjust “Hour, “Press
button.
00 is flashing
or
button -
Adjusts clock “Minute” from 0 to
59.
Press
button complete Alarm clock setting.
Count Down Timer
setting
0 :00
0 is flashing
or
adjust parking “Hour” (value from 0 to 2).
Complete adjust “Hour, “Press
button.
or
adjust parking “Minutes” (value from 0 to
30).
Press
button complete count down timer setting.
Press & hold button
+
for 5 seconds
(chirp x 3)
Full battery icons
flash
Power Save mode : ON ? OFF
LCD remote transceiver uses “0” current to save the
battery power.
Exit: Press
+
buttons or not press any button within 10 seconds, it will exit remote programming
mode automatically.
Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing
the button of the LCD screen transceiver.
Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will alert user through
melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody
sound
only, the remote control buttons will not send a command to the system.
