Encore Networks BANDIT III, Быстрый старт

Страница: 8 / 16

Page 8
BANDIT III Reference Module, Document 1
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
Note: For chassis and port specifications, see BANDIT III Hardware Specifications .
Warning: Always follow safety procedures when working with electrical equipment.
See Basic Safety Guidelines .
1.1.6 Throughput
The BANDIT III chassis has the following system throughput:
• LAN to WAN, without encryption: 9,000 packets/second, with incoming and outgoing
traffic at 64 bytes/packet
• LAN to WAN, with encryption and decryption: 1,800 packets/second, with incoming
traffic at 50 bytes/packet and outgoing traffic at 100 bytes/packet
1.1.7 Power Supply
The BANDIT III is available in models that accept power from a DC power source (at
-24/-48 VDC or -12/-24 VDC) or in models that accept power from an industry-standard
autosensing 100/240 VAC adapter connected to an AC power source. A BANDIT III DC-
powered chassis will also accept input from an AC power supply. The BANDIT III’s AC
power supply converts the AC input power to 5 VDC at 3 amps output for use by the
BANDIT III chassis.
Table 1-1. BANDIT III Chassis Standard Port and Power Configurations
Chassis
Model
IDU Serial
Ports
Input Power
Configuration
Input Power Details
110/220 V
AC
-24/-48 V
DC
-12/-24 V
DC
Basic
and
ESM AC •
DC
•
•
Failover DC
and AC
a
• •
• •
Expanded • AC •
•
DC
•
• •
•
Failover DC
and AC
b
• •
• • •
a. This is a basic DC chassis (-24/-48 VDC or -12/-24 VDC), with standby AC power.
b. This is an expanded DC chassis (-24/-48 VDC or -12/-24 VDC), with standby AC power.
Top Doc
Doc List
Module TOC