Encore Networks BANDIT III, Быстрый старт

Страница: 7 / 16

BANDIT III Hardware Description
Page 7
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
Figure 1-10. BANDIT III Chassis, Rear Panel, Expanded Model,
-12/-24VDC Input Power
(or Failover -12/-24 VDC and 110/220 VAC Input Power)
In summary, there are two chassis models:
• Basic ( Figure 1-2 ) or expanded ( Figure 1-3 ). For each chassis model, there are:
- Three standard input-power port configurations (110/220 VAC, -24/-48 VDC, or
-12/-24 VDC). The three configurations for the basic model are shown in Figure 1-4 ,
Figure 1-5 , and Figure 1-6 . The three configurations for the expanded model (with four
IDU serial ports) are shown in Figure 1-8 , Figure 1-9 , and Figure 1-10 . These total six
physical port configurations for the BANDIT III chassis.
- Two failover input-power configurations (-24/-48 VDC with 110/220 VAC or
-12/-24 VDC with 110/220 VAC). Each BANDIT III chassis that uses DC input
power—basic (
Figure 1-4 and Figure 1-5 ) and expanded ( Figure 1-9 and
Figure 1-10 )—can instead use a failover DC and AC power option. This failover power
capability adds four power configuration options for the BANDIT III chassis.
• The six port configurations and the four additional power configurations total ten
standard port and power configurations for the BANDIT III chassis.
1.1.4 BANDIT III E&M Signaling Chassis
For information on this chassis and its functions, see The BANDIT III E&M Signaling Chassis .
1.1.5 BANDIT III Port and Power Configurations
Table 1-1 lists the BANDIT III’s standard port and power configurations.
Note: Also see The BANDIT III E&M Signaling Chassis .
Top Doc
Doc List
Module TOC