Encore Networks BANDIT II C2C, Руководство пользователя

Страница: 4 / 8

Page 4
BANDIT II C2C Module, Document 3
10 A shell cover is provided with the DC power connector, to provide strain relief for the
wires. Restrain the wires against the lower half of the shell, and place the shell around
the connector, as described in the following substeps:
a
Seat the DC power connector (the plug) into the bottom half of the shell. The connector
will seat into the shell in only one way, as shown in
Figure 3-6 .
Figure 3-6. Cabled Three-Pronged DC Power Connector and
Bottom Section of Shell
Note: The top and bottom sections of the shell differ. The top section (recall Figure 3-1 )
has flanges to fit against the bottom section’s latches (recall Figure 3-3 ).
b With the plug seated into the bottom section, place the top section of the shell onto the
bottom section. Do not yet snap them into place. (
Figure 3-7 shows how the top and
bottom sections fit together around the DC power plug.)
Module TOC