V1.2
Pre-installation
In order to use the service in Control you need to connect your equipment and
devices. This process has three steps:
Check that your internet connection is working properly
Connect the Ethernet cable from the enControl Gateway to any free
port on your Internet Router. Do not connect this cable to your
Router's WAN port even if it is free.
Connect the Power Supply to a power outlet and then to the Gateway.
The gateway has no power button: it will only turn on automatically
.
That is all! Once the Gateway is connected as shown in the previous image,
you can now access enControl to configure your system and enjoy your new
Smart Home as explained in your User Manual. Remember that you can
access enControl using your preferred web browser and connecting to the
https://encontrol.io
page and using your username e and password.
