Harmony IP I/O8 Network Monitoring & Control User Manual
18
SYSTEM TAB
NOTE: This tab is not available in the NR model
In order for the IP I/O8 to communicate with other HARMONY devices on a particular network, a system needs
to be created. During this step, the HARMONY devices that are communicating are added in.
During the system setup, the schedule number that is to be used per device is to be added in during the
creation of the system.
Refer to the image above. From the
Beacon Flasher
section of the
System
tab panel, click the
Add
button. This
will enable the section to be active allowing you to enter the details for a HARMONY device.
Type a
name
for the HARMONY device in the
Name
field.
Select the
Schedule Number
that is to be associated with the HARMONY device being entered.
Содержание Harmony IP I/O8
