Encision EM3 AEM, Руководство пользователя, Страница: 23 / 48

System Setup
EM3 AEM Monitor User’s Guide 3-7
Bipolar Current Indicator System Check
The response of the Bipolar Current Indicator may be tested before use.
When performing this check for the first time with a particular bipolar generator, start at a low
power setting. Then increase the power setting to obtain a mid-scale illumination of the bar-
graph. This test ensures that all three components (cord, bipolar instrument and Bipolar
Current Indicator) are functional.
1. Set the generator at 5 to 10 watts (depending upon the generator characteristics).
2. Touch the tines of the instrument together. There should be a smooth registration of
the current on the Bipolar Current indicator. The clicking will also change its rate in
correspondence with the current.