Enarco CRENA 22, Инструкция по эксплуатации

Страница: 49 / 216

REVERSIBLE VIBRATORY PLATE COMPACTOR
11
CRENA 22*, 26*, 32*
en
The vibratory plate is driven by four-stroke single-cylinder engine. The most frequently used engine are
gasoline engines HONDA and diesel engines HATZ. The engine is coupled to the vibrator by a drive belt.
Centrifugal clutch mounted on the engine shaft disconnects power transmission at idle speed of the engine.
The operator is controlling the plate by a resiliently mounted and tilting control bar, where travel control lever
and throttle lever are located. In the case of electronically controlled engine is replaced by the switch lever of
gas idling and working speed.
3.1 BASIC TECHNICAL PARAMETERS
MODEL
DIMENSIONS (mm)
B H h h1 L l l1
CRENA 22 400 990 630 1090 1180 630 685
CRENA 26 450 1000 700 1100 1220 700 715
CRENA 26H 450 1000 700 1100 1225 700 725
CRENA 32 500 1040 750 1130 1290 750 790
CRENA 32H 500 1040 750 1130 1300 750 800
TIPO CRENA 22 CRENA 26 CRENA 32
Modelo CRENA 22 CRENA 26 CRENA 26H CRENA 32 CRENA 32H
Weight kg 120 160 170 210 215
Frecuency Hz 100 95 95 90 90
Centrifugal Force kN 22 26 26 32 32
Maximun speed.
(forward/backward *)
m/min 24 22 22 22 22
Maximum Climbing
Ability
% 30 30 30 30 30
Vibratory Plate Width mm 400 450 450 500 500
Vibratory Plate Lenght Mm 630 700 700 750 750
Engine - HONDA HONDA HATZ HONDA HATZ
Model - GX 160 GX200 1B20 GX200 1B20
Fuel - petrol gasolina diesel gasolina diesel
Net power/3600rpm kW 3.6 6.3 5.0 8.7 7.9
Starting - manual manual manual manual manual
* specified speed is valid for optimal conditions
– difference of the fwd/rew speed up to ±15%.