Version
Document Title
Release Date
08
EL2.0
–
Installation Manual
2020-03-18
EL2.0 Installation Manual
–
Rev.08 Mar 2020
27
ELECTROLYSER MONITORING TOOLS
The EL2.0 can be monitored and controlled remotely by authorised users simply
by logging into Enapter’s cloud
services on a web browser (
https://cloud.enapter.com/login
This is also available on mobile by using the Enapter application, which is available for iOS and Android.
MOBILE APPLICATION
You can control and monitor your Enapter devices and integrated systems using the Enapter application, available
for iOS and Android. Please refer to your relevant manual to help you with the installation and usage of the
applications.
PROGRAMMING PORTS
The programming ports have been implemented in order to allow firmware updates. These updates are performed
by Enapter Srl. Please do not use it without previous agreement with the supplier.
The front panel features two USB and a single ethernet port.
P1.1
- This USB port acts as the primary board programming port that allows wired firmware upgrades for the
EL board. These updates are performed by Enapter Srl. Please do not use it without previous agreement with the
supplier.
P1.2
- This USB port acts as the acquisition board programming port that allows wired firmware upgrades for the
communication board. These updates are performed by Enapter Srl. Please do not use it without previous agreement
with the supplier.
E1.1
- This Ethernet port allows Modbus access for system integrators.
WARNING
Do not use the programming ports, they are strictly reserved for future firmware updates by
Enapter Srl.
Enapter Srl declines any responsibility in case of damage due to the disregard of this warning.
P1.2
P1.1
E1.1
