[2]
Set up the Rigger Mount
✔
The Rigger Mount
1
& U-Bolt System
3
allow the NEXGen Fixed Outriggers to
be used with either the Dynamique or Bi-Unique Bi-Ski.
The Rigger Mount
1
attaches to the Articulating Mechanism, a shared feature
of both bi-skis.
To install:
1)
Slide the two 5/16 hex bolts
2
into the holes at the front of the
Mechanism Plate and push the Rigger Mount
1
onto the bolts.
2)
Secure the Rigger Mount
1
to the Mechanism Plate using the provided
washers and nylock wing nuts
4
.
While skiing:
Periodically check that the wing nuts
4
are sufficiently tight.
Remove the Rigger Mount
1
whenever you are not actively skiing with fixed
outriggers. The ends can dig into the snow, cause the skier to flip, and
damage the Rigger Mount
1
.
