Enabling Devices Jumbo 1526 Скачать руководство пользователя

Страница: 8 / 23

Repeat step 4 (on the previous page) three more times for
remaining digits. Use

for the second digit,

for the third

digit, and

for the fourth digit.Write down the code dig-

its in the remaining TV code boxes on page 8.

To check for codes of other devices, repeat steps 1
through 5 (starting on the previous page), but substitute
the appropriate device key for each device you are check-
ing.Write down the device’s code digits in the appropriate
code boxes on page 8.

PROGRAMMING A MASTER POWER MACRO

In its default state, the

POWER

key on the One For All 4 Device Universal

Remote Control will individually power your home entertainment devices
on or off. However, you can also program a Master Power Macro onto the

POWER

key that will sequentially turn on or off all the devices with a single

key press.

Programming The Power Key For The Master Power Macro

Press and hold

SET

until the

LED

(red light) blinks twice,

then release

SET

Enter

. The

LED

will blink twice. Then press

POWER

once.

For the first device you want in the power-on sequence,
press its device key (e.g.,

CBL/SAT

) once.

Repeat step 3 up to three more times to add desired
devices to the power-on sequence (e.g.,

VCR/PVR

DVD

, and

To save the settings and exit the program, press and hold

SET

until the

LED

blinks twice, then release

SET

Operating The Master Power Macro

After programming, point the remote control at the
devices and press

POWER

for at least 2 seconds to sequen-

tially turn on (or off) your devices.

NOTE: When

POWER

is pressed for less than 2 seconds, a power com-

mand will only be sent to the currently-selected device. This allows
you to still individually power devices on or off.

Devices will turn on (or off) according to your
programmed sequence.

NOTE: The currently-selected device will always turn on or off first,
followed by the remaining programmed sequence. After the master
power sequence has been completed, the remote control will be set to
control the first powered-on device.

NOTE: If one or more devices does not have a

POWER

key, the power

off/on sequence may be slightly delayed when the remote control signals
the device(s). This action is normal.

continued on next page...

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.

NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.

For example, to search for a code for your TV:

On the remote control, press

once.

Press and hold

SET

until the

LED

(red light) blinks twice,

then release

SET

Enter

. The

LED

will blink twice.

Aim the remote control at the TV and slowly alternate
between pressing

POWER

and

. Stop when the TV turns

off (after pressing

POWER

). If the device does not have a

Power key, you can substitute another function, such as
digits

CH +

, or

PLAY

NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.

To lock in the code, press and release

SET

. The

LED

will blink

twice.

To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code pro-
cedure (as above), you may need to find out which four-digit code is operat-
ing your equipment. For example, to find out which code is operating your
TV:

On the remote control, press

once.

Press and hold

SET

until the

LED

(red light) blinks twice,

then release

SET

Enter

. The

LED