Dazzling display!
Dazzling display!
Dazzling display!
Dazzling display!
See a dazzling display of rotating multicolored lights when the panel is
activated. Just move your hand in front of the motion sensor panel to
light it up and play soft, soothing music. Music plays for 20 seconds
after activation. Encourages exploration and directed reach. A great
addition to any sensory space. Wall mounting hardware included. Size:
18"L x 16"W x 4½"H. Requires 6 C Batteries. Weight: 4¼ lbs.
1.
The Kaleidoscope Wall Panel requires 6 C batteries (not included).
Use Alkaline batteries only (e.g. Duracell or Energizer brand). Do
not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. The battery compartments are located under the
compartment on the top of the panel. To access the
compartments lift up the access door and then remove the Phillips
Head screws from each battery compartment cover. Install the C
batteries into each holder. When installing new batteries, always
be careful to observe battery polarity. Replace battery covers and
screws. Never mix old and new batteries together or different
brands or types together. (See Photo).
2.
Turn the ON/OFF/VOLUME knob clockwise, you will hear an
auditable click. Adjust to knob for desired volume level of the
music.
3.
See a dazzling display of rotating multicolored lights when the
panel is activated. Just move your hand in front of the motion
sensor panel to light it up and play soft, soothing music. Music
plays for 20 seconds after activation. Encourages exploration and
directed reach.
Please Note:
Please Note:
Please Note:
Please Note: Some low room light required for activation.
Troubleshooting:
Troubleshooting:
Troubleshooting:
Troubleshooting:
Problem:
Problem:
Problem:
Problem: The Kaleidoscope Wall Panel’s lights or music do not work
when activated.
Action #1:
Action #1:
Action #1:
Action #1: Make sure the ON/OFF/VOLUME knob is turned ON and
adjusted to an audible level.
Action #2
Action #2
Action #2
Action #2:::: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Problem:
Problem:
Problem:
Problem: The Kaleidoscope Wall Panel does not work at all.
Action:
Action:
Action:
Action: Check all Batteries for strength and for proper battery polarity.
Replace if weak or dead.
Care of the Unit:
Care of the Unit:
Care of the Unit:
Care of the Unit:
The Kaleidoscope Wall Panel can be wiped clean with any household
multi-purpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not use
Do not use
Do not use
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Do not submerge
Do not submerge
Do not submerge
Do not submerge the unit, as it will damage the electrical
components.
Rev
Rev
Rev
Rev 5
5
5
5/2
/2
/2
/2/17
/17
/17
/17
