emz smart Stove Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 90

emz smart Stove Скачать руководство пользователя страница 63

SETTINGS IN THE PROFESSIONAL MODE

smart Stove - 0142 - 42WMSUGAT2-C

63

Protective functions

In professional mode, the ›1.5 Protective functions‹ menu is
additionally available. It has the following items:
- ›Anti-Blocking‹
- ›Antifreeze protection‹
- ›Limits‹

Select ›Anti-Blocking‹.

The pumps and valves can be moved daily to prevent them
from getting blocked.
This function is not activated as long as the pumps are acti-
vated in normal operation.
Determine the time of the day and the operating period.
Activate the required pumps and valves.

Return to ›1.5 Protective functions‹.
Select ›Antifreeze protect.‹

NOTICE

The antifreeze protection function may prevent the heating
system from damage which could be caused by freezing
medium.
Enter the lowest temperature ›Min.temperature‹ at which a
system filled with pure water without antifreeze could operate
without suffering damage.

Activation and setting of the anti-freeze protective function.
Change the anti-freeze protection temperature and activation
interval via ›Min.temperature‹ and ›Hysteresis‹.

Return to ›1.5 Protective functions‹.
Select ›Limits‹.

1.5 Protective funct...

17.03.2016

13:54

Anti-blocking

Antifreeze protect.
Limits

1.5.1 Anti-block pr...

17.03.2016

13:54

Start

11:00

Duration

5s

Charge pump
SH blocking
DHW pump

1.5.3 Antifreeze pr...

17.03.2016

13:54

Activation

Min.temperature

3.0°C

Hysteresis

2K

«
...
61
62
63
64
65
...
»

Содержание smart Stove



























































































Отзывы:

Нет отзывов