EMX Industries, Inc.
Tech support: 216-518-9889
2/2
ETM-17_Rev2.1_061620 [email protected]
Installation
1.
Mount the ETM-17 using the four holes provided and wire according to the wiring connections and
operator instructions. The power terminals are not polarity sensitive.
2.
Current date and time setup:
•
To switch between standard and military time, hold down the CLOCK button until PM/AM
appear for standard or disappear for military.
•
While holding down the CLOCK button, repeatedly press the DAY/HOUR/MIN button to set
the current day, hour and minute.
3.
Program Setup:
•
Press TIMER button. 1
ON
--:-- will appear on
the screen.
•
Press DAY button until the desired daily
options appear on the screen. See the chart
to the right for the DAY options.
Each event ON and OFF (Ex: 1
ON
and 1
OFF
)
must have daily program options
that match.
•
Press HOUR and MIN to set the desired time.
•
Press TIMER button again 1
OFF
--:-- will appear
on the screen.
•
Press HOUR then MIN to set the desired time
to turn event 1 OFF.
•
Repeat the programing setup steps to set
events 2-17 ON and OFF.
•
Press CLOCK button to start programs
•
Press MANUAL button to move the indicator
line at the bottom of the screen to auto.
MANUAL Indicator Line
ON
Timer function bypassed constant on
AUTO
Follows program
OFF
Timer function bypassed constant off
15 DAILY PROGRAM OPTIONS
1.
MO TU WE TH FR
SA SU
2.
MO
3.
TU
4.
WE
5.
TH
6.
FR
7.
SA
8.
SU
9.
MO TU WE TH FR
10.
SA SU
11.
MO TU WE TH FR
SA
12.
MO TU WE
13.
TH FR
SA
14.
MO
WE
FR
15.
TU
TH
SA
4.
Optional programming:
•
Sleep Mode
: Press down HOUR and MIN for 3 seconds while the screen displays the clock.
The system will power down and the screen will go blank. To power back up, press key.
(Pressing this key will erase all programmed memory.)
•
Countdown Function
:
Press down CLOCK and TIMER for 3 seconds while the screen displays
the clock. The screen will show d 00:00
00.
To set the countdown, hold CLOCK down and set
the time with the HOUR and MIN buttons. To start the countdown, press MANUAL. To exit,
press down CLOCK and TIMER for 3 seconds.
Warranty
EMX Industries, Inc. products have a warranty against defects in materials and workmanship for a period
of two years from date of sale to our customer.
TIP:
