32
To enable / disable cyclically reproduced programs,
follow these steps:
1.
From the «Settings» item and using the
navigation keys
move the cursor to
«Cyclic recurrence».
2.
Press button
for enable/disable
cyclically reproduced programs.
To change duty cycle of modulation, follow these
steps:
From the «Settings» item and using the
navigation keys
move the cursor to
«Duty cycle».
Press button
for switching duty cycle.
On the screen will display current value.
To change carrier frequency of modulation, follow
these steps:
1.
From the «Settings» item and using the
navigation keys
move the cursor to
«Carrier frequency».
2.
Press button
for switching carrier
frequency. On the screen will display
current value.
The value of the carrier frequency should be
changed only when using multiple devices in the
same room.
In order to change the therapy programs time
parameter, follow these steps:
1.
From the “Settings” section and using
the navigation keys
, position the
cursor on the “Time for therapeutic
programs” item.
2.
Press the key
to change the time of
the therapeutic program. At the same
time, the current value will be displayed
on the screen.
This parameter needs to be increased if the
default time (5 minutes) is not enough to saturate
biologically active points. For further clarification,
you must contact your doctor.
Содержание Plus 2.0
Страница 1: ...1 emWave Plus 2 0 User s manual...
