6
Sun StorageTek PCI Express Enterprise 4 Gb FC HBA Emulex Installation Guide • December 2005
When attaching the optical cable, be sure to:
1. Connect the fiber-optic cable to an LC connector on the HBA (see
FIGURE 3
).
FIGURE 3
Attaching the Optical Cable
2. Connect the other end of the cable to the Fibre Channel device.
On
2 Fast Blinks
2 Gb Link Rate – Normal, Link up
On
3 Fast Blinks
4 Gb Link Rate – Normal, Link up
Slow Blink
Off
Normal – Link Down
Slow Blink
On
Not Defined
Slow Blink
Slow Blink
Off-line for Download
Slow Blink
Fast Blink
Restricted Off-line Mode (Waiting for Restart)
Slow Blink
Flashing
Restricted Off-line Mode, test active
Fast blink
Off
Debug Monitor in Restricted Mode
Fast blink
On
Not Defined
Fast blink
Slow Blink
Debug Monitor in Test Fixture Mode
Fast blink
Fast Blink
Debug Monitor in Remote Debug Mode
Fast blink
Flashing
Not Defined
TABLE 2
LED Status (Continued)
Green LED
Yellow LED
State
Port 0
Port 1
