Apply Power
Verify that the host bus adapter is securely installed in the computer.
1.
Verify that the correct media is attached.
2.
Plug in and turn on the computer.
3.
Observe LEDs for Power On Self Test (POST) results.
4.
View LEDs
Green and yellow display lights (LEDs) can be seen through openings in the
host bus adapter's mounting bracket. Green indicates power and yellow
signifies port activity.
POST conditions and results are summarized in this table.
Green
LED
Yellow
LED
State
OFF
OFF
Wake−up failure (dead board)
OFF
ON
POST failure (dead board)
OFF
Slow blink (1 Hz)
Wake−up failure (dead board)
OFF
Fast blink (4 Hz)
Failure in POST (dead board)
OFF
Flashing (irregular)
POST processing in progress
ON
OFF
Failure while functioning
ON
ON
Failure while functioning
ON
Slow blink (1 Hz)
Normal − 1 Gb link rate
ON
Fast blink (4 Hz)
Normal − 2 Gb link rate
Blink (1 Hz)
OFF
Normal − link down or not yet started
Emulex Drivers, Software and Manuals
7
Содержание LP982
Страница 13: ...Emulex Drivers Software and Manuals 13 ...
