Emulex LP982, Инструкция по установке и справочник

Страница: 3 / 19

Installation
Caution Emulex LightPulse ® Host Bus Adapters (HBAs) contain
electronic components that can be damaged by static
electricity through an electrostatic discharge (ESD) event.
To prevent ESD damage, maintain constant contact with
any grounded metal surface. A grounding wrist strap is
useful for this purpose. Handle the card carefully at all
times and preferably by the edges. Avoid touching
electronic components and keep the card in the original
packaging until you are ready for installation.
Compatibility
Software
Environments Windows Server 2003, Windows 2000, Windows NT,
Linux, NetWare
Hardware
Environments PCI hardware platforms: x86
Prerequisites
Host computer must provide 3.3 VDC bus power
One open 32−bit or 64−bit (64−bit recommended) PCI or PCI−X bus
slot with 3.3 VDC +/− 5%
•
•
PCI bus clock rate of 33 MHz or 66 MHz
•
PCI−X bus clock rate of 66 MHz, 100 MHz, or 133 MHz
•
Media and connectors
•
Emulex Drivers, Software and Manuals
3