Change the GBIC Connector
A GBIC, or Gigabit Interface Converter, is a connector that offers a flexible
choice of copper or fiber optic media. A GBIC supports either short wave or long
wave optical transmission. These types are available:
Short−wave fiber optic GBIC with dual SC connectors
•
Long−wave fiber optic GBIC with dual SC connectors
•
Copper GBIC with DB9 connector
•
Caution An Emulex supplied GBIC is required to maintain regulatory
compliance with worldwide certifications (for example, FCC,
C−Tick, CE, and so on).
A GBIC should be matched with its cabling to obtain optimum performance and
distance. For example, a short wave fiber optic GBIC best supports either
62.5/125 or 50/125 multimode cable, while a long wave fiber optic GBIC
functions best with 9/125 single mode cable.
To change a GBIC:
Exert slight pressure on the tabs.
1.
Gently pull out the GBIC as shown.
2.
Slide in a new GBIC, pressing firmly to seat the GBIC into the board.
3.
Emulex Drivers, Software and Manuals
6
