Hardware Reference
FCC and Regulatory Notices
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A` LASER DE CLASSE 1
TO IEC 825−1 (1993) + CENELEC HD 482 S1
The above statement applies to products marketed in the European Union.
Model LP8000−D1 (Embedded Copper)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense. Shielded cables must be used between this
equipment and attached peripheral devices. The reader is cautioned that changes
or modifications made to the equipment not expressly approved by Emulex could
void the user's authority to operate this equipment.
The above statement applies to products marketed in the USA
This class A digital apparatus meets all requirements of the Canadian
Interference − Causing Equipment Regulations.
Cet appareil numerique de la Classe A respecte toutes les exigences du reglement
sur le materiel brouilleur du Canada.
This statement applies to products marketed in Canada.
FCC Compliance Information Statement; Models LP8000−N1/L1/T1 (GBIC
Models):
Emulex Drivers, Software and Manuals
13
