MITSUBISHI EVO 4-8 PLUGIN ECU USER MANUAL
WWW.EMTRON.WORLD
© EMTRON AUSTRALIA PTY LTD MAY 2018
3
2.0 Plugin Features
General
▪
KV8 ECU based platform.
o
Dual 100MHz processors
o
32MB ECU logging memory
o
Over 1000 logging channels available
o
1Hz to 500Hz logging rate
▪
Aluminium 6061 Grade CNC billet enclosure
▪
Compatible with all Emtron proven motorsport features(Launch Control, Rolling
Launch, Anti-Lag, Traction Control)
▪
Upgradeable to run the Emtron fuel model through installation of a flex meter, fuel
temperature and fuel pressure sensor
▪
Idle speed closed loop control using DBW with advanced Throttle Mass Flow (TMF)
airflow calculations
▪
Knock control with high speed digital filtering for each cylinder using the OEM sensor
with selectable centre frequency and bandwidth
▪
Pre-configured Calibration file loaded providing a comprehension tuning platform
▪
Input Expansion Capabilities through DTM connector
o
3x User Analog Volt Inputs (Fuel Temperature, Fuel Pressure, Inlet
Temperature)
o
1x User Digital Input (Flex Meter Input and switch inputs)
o
2x User Analog Inputs
▪
Emtune software for tuning and data analysis
Communications
▪
CAN 2.0B Bus 2: User CAN Bus for I/O expansion (Lambda, EGT)
▪
High Speed Ethernet 100Mbps for tuning software connection
Operating Temperature
▪
Recommended operating range: -30 to 85°C (-22 to 185°F)
Physical
▪
Enclosure Size 160 mm x 162 mm x 38 mm
▪
890g
